AnzoGraph Requirements

This topic lists the minimum requirements and recommendations to follow for setting up static AnzoGraph host servers and cluster environments.

Hardware Requirements
Software Requirements
Firewall Requirements

Hardware Requirements

Cambridge Semantics lists above average production system hardware requirements as a guideline. Large production data sets running interactive queries may require significantly more powerful hardware and RAM configurations. Provision production server hardware accordingly to avoid performance issues.

Component

Minimum

Recommended

Guidelines

Available RAM

16 GB (for small-scale testing only)

200 GB or more

AnzoGraph needs enough RAM to store data, intermediate query results, and run the server processes. Cambridge Semantics recommends that you allocate 3 to 4 times as much RAM as the planned data size. Do not overcommit RAM on a VM or on the hypervisor/container host. Avoid memory paging to disk (swapping) to achieve the highest possible level of performance. For more information about determining the server and cluster size that is ideal for hosting AnzoGraph, see AnzoGraph Server Sizing Guidelines.

Disk space and type

10 GB HDD

200+ GB SSD

AnzoGraph requires 10 GB for internal requirements. The amount of additional disk space required for load file staging, data persistence, or backups depends on the size of the data to be loaded. For persistence, Cambridge Semantics recommends that you have twice as much disk space on the local AnzoGraph file system as RAM on the server.

CPU (Intel only)

2 cores

32 cores

Once you provision sufficient RAM and a high-performing I/O subsystem, performance depends on raw CPU capabilities. A greater number of cores can make a dramatic difference in the performance of interactive queries. Do not overcommit CPU cores so that the sum of vCores becomes greater than the number of real CPU cores. AnzoGraph does not support AMD processors at this time.

Networking

10gbE

20+gbE

Not applicable for single server installations. Since AnzoGraph is high performance computing (HPC) Massively Parallel Processing (MPP) OLAP engine, inter-cluster communications bandwidth dramatically affects performance. AnzoGraph clusters require optimal network bandwidth.

Important

All servers in a cluster must be in the same network. Make sure that all instances are in the same VLAN, security group, or placement group.

In a switched network, make sure that all NICs link to the same Top Of Rack or Full-Crossbar Modular switch. If possible, enable SR-IOV and other HW acceleration methods and dedicated layer 2 networking that guarantees bandwidth.

Clusters and Virtual Environments

AnzoGraph requires that all elements of the infrastructure provide the same quality of service (QoS). Do not run AnzoGraph on the same server as any other software except when in single-server mode and with an expectation of lowered performance. Providing the same QoS is especially important when using AnzoGraph in a clustered configuration. If any of the servers in the cluster perform additional processing, the cluster becomes unbalanced and may perform poorly. A single poor performing server degrades the other servers to the same performance level. All nodes require the same hardware specification and configuration. Also use static IP addresses or make sure that DHCP leases are persistent.

To ensure the maximum and most reliable QoS for CPU, memory, and network bandwidth, do not co-locate other virtual machines or containers (such as Docker containers) on the same hypervisor or container host. For hypervisor-managed VMs, configure the hypervisor to reserve the available memory for the AnzoGraph server. For clusters, make sure there is enough physical RAM to support all of the AnzoGraph servers, and reserve the memory via the hypervisor.

In addition, running memory compacting services such as Kernel Same-page Merging (KSM) impacts CPU QoS significantly and does not benefit AnzoGraph. Live migrations also impact the performance of VMs while they get migrated. While live migration can provide value for planned host maintenance, AnzoGraph performance may be impacted if live migrations occur frequently. For more information about Kernel Same-page Merging, see https://en.wikipedia.org/wiki/Kernel_same-page_merging.

Note	Advanced configurations may benefit from CPU pinning on the hypervisor host and disabling CPU hyper-threading. For more information about CPU pinning, see https://en.wikipedia.org/wiki/Processor_affinity. For information about hyper-threading, see https://en.wikipedia.org/wiki/Hyper-threading.

Cambridge Semantics can provide benchmarks to establish relative cluster performance metrics and validate the environment.

Software Requirements

The table below lists the software requirements for AnzoGraph servers.

Component

Minimum

Recommended

Guidelines

Operating System

RHEL6, CentOS6

RHEL7+, CentOS7+

See Tuning User Resource Limitations (ulimits) below for information about setting ulimits.

Note	AnzoGraph is not supported on RHEL/CentOS 8 at this time.

GNU Compiler Collection

N/A

Installed

Install the latest version of the GCC tools for your operating system.

bzip2

N/A

Installed

Required for unpacking the AnzoGraph tool set during installation.

Tuning User Resource Limitations (ulimits)

Cambridge Semantics recommends that you tune the user resource limits (ulimits) for your Linux distribution to increase the limits for the following resources:

Increase the open files limit to at least 4096.
Increase the limit for the following resources to unlimited:
- cpu time
- file locks
- file size
- max memory size
- max user processes
- virtual memory

To view the current ulimits, run ulimit -a. To permanently change ulimits, modify the /etc/security/limits.conf file. For more information, see How to set ulimit values in the RHEL support documentation.

Note	Also make sure that the Linux environment variables http_proxy and https_proxy are not set. The Anzo gRPC protocol cannot make connections to the database when proxies are enabled.

Optional Software

Program	Description
vim	Editor for creating or changing files.
sudo	Enables users to run programs with alternate security privileges, such as the azg_system_config utility that configures the required AnzoGraph kernel settings.
net-tools	Networking utilities.
psutil	Python system and process utilities for retrieving information on running processes and system usage.
tuned	Linux system service to apply tunables.
wget	Utility for downloading files over a network.
Google SDK	For virtual servers on Google Cloud Engine (GCE). Command line tool to enable syncing of data from Google storage. You can download the latest version from Google: https://cloud.google.com/sdk/.

Firewall Requirements

AnzoGraph servers communicate via TCP/IP sockets. AnzoGraph communicates with Anzo via the secure, encrypted, gRPC-based Anzo protocol. Since AnzoGraph is SPARQL-compliant, you also have the option to use standard SPARQL HTTP/S protocol for communication.